Oil catch cans are simple components with a surprisingly technical job. Learn what engine blow-by is, how PCV and CCV systems handle crankcase vapour, why turbocharged and direct-injection engines deserve special attention, and how a properly designed baffled catch can can help reduce the amount of oil mist entering your truck or Jeep's intake system.
Oil Catch Cans Explained in 30 Seconds
An oil catch can is installed in a crankcase ventilation circuit to separate suspended oil, fuel and moisture from crankcase vapour before that vapour is routed back into the engine's intake. Every piston engine produces some amount of blow-by. The factory PCV or CCV system must evacuate that pressure, but doing so can also carry oil mist into the intake tract.
Catch cans do not eliminate blow-by, repair worn piston rings or replace proper engine maintenance. Instead, a well-designed catch can acts as a separator. This can be especially useful on certain turbocharged, direct-injected and high-output engines where crankcase vapour contamination can become significant.
Canadians looking for an application-specific system can browse oil catch cans at Off-Road.ca or explore additional engine components.
In This Guide
- What engine blow-by is
- Why PCV and CCV systems exist
- How oil vapour reaches the intake
- Direct injection and intake valves
- Why turbo engines deserve attention
- Baffled vs empty catch cans
- Single-can vs dual-can systems
- EcoBoost catch cans
- Jeep 2.0L turbo catch cans
- Diesel and Power Stroke catch cans
- Catch cans on Hemi engines
- Canadian winter considerations
- Catch-can maintenance
- Featured catch-can kits
- Frequently asked questions
What Is Engine Blow-By?
To understand why an oil catch can exists, you first need to understand blow-by. During combustion, rapidly expanding gases push the piston downward and create the torque that moves the vehicle. Piston rings provide the seal between the piston and cylinder wall, but that seal is not perfectly gas-tight under every operating condition.
A small quantity of combustion gas can pass the piston rings and enter the crankcase. This is called blow-by. The crankcase atmosphere can therefore contain a mixture of combustion gases, oil aerosol, fuel vapour and water vapour.
Some blow-by is normal in a healthy internal-combustion engine. The amount varies with engine design, piston-ring sealing, engine condition, temperature, load, cylinder pressure and operating conditions. Excessive blow-by, however, can also be a symptom of mechanical wear or another engine problem.
Why Crankcase Ventilation Is Necessary
Blow-by cannot simply be allowed to accumulate inside the crankcase. As gases enter the crankcase, pressure has to be controlled. Excessive crankcase pressure can contribute to oil leaks, seal problems and other undesirable operating conditions.
Gasoline engines commonly use a Positive Crankcase Ventilation, or PCV, system. Diesel applications are frequently described using the broader term Closed Crankcase Ventilation, or CCV. Manufacturers may use different terminology and routing depending on the engine.
In a closed system, crankcase vapours are normally drawn or routed back into the engine's intake stream instead of being vented directly into the atmosphere. The vapour can then travel through the intake and be consumed during combustion.
The Basic Flow Path
The catch can is inserted into this path. Instead of sending all suspended liquid and vapour directly toward the intake, the can gives oil droplets and other condensable material an opportunity to separate from the airflow and collect in a serviceable reservoir.
Why Does Oil End Up in the Intake?
The crankcase is an extremely active environment. The crankshaft and rotating assembly are moving at high speed while lubricating oil is being pumped and thrown throughout the engine. Blow-by gases moving through this environment can carry extremely small droplets of oil with them.
Factory crankcase ventilation systems often contain their own oil-separation strategies, but a portion of the remaining aerosol can still be carried into the intake system. Depending on the engine, evidence of this may appear as an oily film inside intake piping, turbo inlet plumbing or other components.
An aftermarket catch can adds another stage of separation before that vapour reaches the intake. Its effectiveness depends heavily on the internal design of the can, airflow characteristics, correct routing and the requirements of the specific engine.
Why Direct Injection Changes the Intake-Valve Equation
Direct injection is particularly relevant when discussing oil catch cans because it changes where gasoline enters the engine.
In a traditional port-fuel-injected gasoline engine, fuel is sprayed into the intake port upstream of the intake valve. As the fuel passes the valve, it can provide a washing effect on the back side of that valve.
In a gasoline direct-injection engine, the injector sprays fuel directly into the combustion chamber. The back of the intake valve therefore does not receive the same continuous fuel wash found in conventional port injection.
Intake-valve deposits are a known concern on GDI engine designs. Oil-containing crankcase vapour is one potential contributor to those deposits, although deposit formation is influenced by several engine-design and operating factors.
What it cannot guarantee: complete prevention of all intake-valve deposits.
That distinction is important. A quality catch can should be viewed as an oil-separation and contamination-control device, not as a guaranteed cure for every carbon-deposit issue.
Why Turbocharged Trucks Can Produce Significant Crankcase Vapour
Turbochargers increase the mass of air entering an engine so that more fuel can be burned and more power can be produced. Under boost and heavy load, cylinder pressures can become considerably higher than during light-load cruising.
Because crankcase blow-by is related partly to cylinder pressure and piston-ring sealing, high-output turbocharged engines can move substantial volumes of crankcase vapour under demanding conditions. This does not mean every turbo engine automatically has excessive blow-by; it means the crankcase ventilation system has to be designed to handle the engine's expected flow throughout its operating range.
Trucks can create demanding operating conditions because they may spend long periods towing, climbing, hauling, running larger tires or working at elevated engine load. Modified engines producing additional boost may place even greater importance on maintaining an unrestricted, correctly engineered crankcase-ventilation path.
Baffled Catch Can vs an Empty Can
Not all catch cans work the same way. An inexpensive container with an inlet on one side and an outlet on the other may technically provide a place for some liquid to settle, but an empty chamber gives very fine oil mist relatively little reason to separate from fast-moving air.
A baffled oil catch can deliberately changes the path and behaviour of the airflow. Depending on the design, the system may use baffles, diverters, filter media or a combination of separation mechanisms.
Empty Catch Can
Primarily provides additional volume. Some larger droplets can fall out of suspension, but fine aerosol may travel directly from the inlet toward the outlet.
Baffled Catch Can
Forces crankcase vapour to change direction and interact with internal surfaces or filtration, providing more opportunity for suspended liquid to separate before the air exits.
How Baffling Helps
When oil-laden air contacts internal surfaces, slows down or changes direction, droplets can collide, combine and fall into the reservoir below. Internal filtration can provide additional surface area on which suspended liquid can collect.
The objective is to achieve meaningful oil separation without creating excessive restriction in the ventilation circuit. That balance becomes increasingly important on high-flow turbocharged and diesel engines.
Single-Can vs Dual-Can Catch-Can Systems
A single catch can is not automatically inferior to a dual-can setup. The correct configuration depends on the factory crankcase-ventilation architecture.
Some engines primarily need interception on one ventilation route. Others can move crankcase vapour through more than one path depending on intake-manifold vacuum, turbocharger operation, engine load and boost.
| Configuration | How It Works | Typical Reason for Use |
|---|---|---|
| Single Can | Intercepts one designated crankcase ventilation circuit. | Appropriate when the engine's factory ventilation strategy allows one primary circuit to be treated. |
| Dual Can | Uses separate cans or separation paths for different ventilation circuits. | Useful on applications where PCV and CCV routes operate differently under vacuum, load or boost. |
The important factor is not simply the number of cans. Correct hose routing, check valves, pressure sensors, flow capacity and compatibility with the factory ventilation strategy are all critical.
Oil Catch Cans on Ford EcoBoost Engines
Ford EcoBoost engines combine turbocharging with gasoline direct injection on many applications, which is why they frequently appear in conversations about catch cans.
A good example is the 2015–2017 F-150 2.7L EcoBoost. Its crankcase ventilation strategy includes both PCV and CCV circuits, and Mishimoto's application-specific system uses two baffled cans to intercept blow-by from both sides.
Mishimoto 2015–2017 Ford F-150 2.7L EcoBoost Baffled Oil Catch Can System
This direct-fit system uses a dual-can configuration to address both the PCV and CCV circuits. It also incorporates the factory CCV pressure sensor and uses an inline check valve intended to prevent the catch can from becoming pressurized when the engine is under boost.
- Direct fit for 2015–2017 Ford F-150 2.7L EcoBoost applications
- Two baffled catch cans
- Captures material from both PCV and CCV circuits
- Accommodates the factory CCV pressure sensor
- Inline check valve for boosted operation
- Application-specific hoses and mounting bracket
- Serviceable cans and filtration components
This type of application illustrates why choosing a vehicle-specific kit can be preferable to simply installing a generic container and routing hoses without considering how the factory PCV and CCV circuits behave under boost.
Oil Catch Cans on the Jeep Wrangler JL 2.0L Turbo
The turbocharged Jeep Wrangler JL 2.0L is another application where crankcase-system airflow and pressure behaviour matter.
The Mishimoto direct-fit JL kit is designed around the vehicle's factory CCV system and uses a 7.5 oz baffled catch can, high-flow filtration and application-specific plumbing. The design is intended to separate oil, fuel and water vapours while maintaining the airflow characteristics required by the factory system.
Mishimoto Jeep Wrangler JL 2.0L Baffled Oil Catch Can Kit
Designed specifically for the turbocharged 2.0L Wrangler JL, this system adds a serviceable baffled separator to the crankcase ventilation circuit rather than relying on a universal, one-size-fits-all can.
- Application-specific Wrangler JL 2.0L design
- 7.5 oz catch-can capacity
- Internal air diverter and baffle
- High-flow filter
- Oil-resistant direct-fit hoses
- Application-specific mounting bracket
- Fully serviceable catch can
Do Diesel Trucks Benefit From Catch Cans?
Catch cans are not limited to gasoline direct-injection engines. Diesel engines generate blow-by too, and high-output turbo-diesel engines can require substantial crankcase-ventilation flow.
Oil aerosol carried through a diesel CCV system can contaminate intake plumbing. On diesel engines equipped with exhaust-gas recirculation, oil entering through the crankcase system can also coexist with soot entering through the EGR system, contributing to contamination within the intake tract. A catch can addresses the crankcase-oil side of that equation; it does not eliminate EGR soot.
The biggest engineering challenge for some diesel catch cans is maintaining sufficient flow. A small, restrictive separator intended for a lower-output gasoline application may not be appropriate for a diesel engine that moves a much larger volume of crankcase vapour.
Mishimoto 2003–2007 Ford 6.0L Power Stroke High-Flow Baffled Oil Catch Can Kit
Mishimoto's 6.0L Power Stroke system uses a larger, high-flow catch-can design intended to preserve crankcase breathing while separating oil, fuel and water vapours from the airflow.
- Direct-fit design for 2003–2007 6.0L Power Stroke applications
- High-flow baffled catch can
- 5.3 fl. oz. reservoir capacity
- CNC-machined baffle with integrated filtration
- Large high-flow inlet and outlet design
- Direct-fit nitrile hoses
- Drain plug for easier servicing
- Serviceable filter and can
What About Oil Catch Cans on Ram Hemi Engines?
Oil catch cans are also popular on Hemi-powered Ram trucks, but the reason should not automatically be described as a direct-injection problem.
Traditional 5.7L Hemi applications use port fuel injection, so their intake valves receive fuel exposure that a pure direct-injection engine does not. Nevertheless, the engine still produces crankcase blow-by and the PCV system can still carry oil mist toward the intake.
A properly engineered Hemi catch can can therefore be used to reduce the quantity of oil-contaminated crankcase vapour reaching the intake path. As with any application, owners should choose a kit designed around the correct engine, model year and PCV routing rather than assuming that any universal catch can is suitable.
Browse the complete Off-Road.ca oil catch can collection to check available vehicle-specific applications.
Single Can, Dual Can or High-Flow Diesel Can: Which Is Right?
| Engine / Application | Key Consideration | Example Approach |
|---|---|---|
| Ford 2.7L EcoBoost | Turbocharged, direct injected and equipped with multiple crankcase ventilation paths | Application-specific dual PCV/CCV catch-can system |
| Jeep Wrangler JL 2.0L Turbo | CCV airflow and factory pressure monitoring must be maintained correctly | Application-specific single baffled high-flow can |
| Ford 6.0L Power Stroke | Higher crankcase-flow requirements of a turbo-diesel engine | Larger high-flow baffled separator |
| Ram Hemi | Reducing oil mist moving through the PCV system | Engine-specific PCV catch-can system where applicable |
Oil Catch Cans in Canada: Cold-Weather Condensation Matters
Canadian weather adds an important maintenance consideration that should not be ignored. A catch can does not necessarily collect pure engine oil. The material inside can also contain substantial quantities of water condensation and fuel vapour.
During cold-weather operation, particularly with frequent short trips, the engine and catch-can system may spend more time below temperatures that would otherwise evaporate accumulated moisture. The result can be a larger amount of watery or milky-looking fluid in the can during winter.
If enough water accumulates and temperatures fall below freezing, that moisture can freeze. A neglected catch can that becomes full or restricted is exactly what you do not want in a system responsible for controlling crankcase pressure.
Trucks driven on short urban trips around Toronto, Ottawa, Montreal, Calgary, Edmonton or other cold Canadian regions can experience very different condensation behaviour than the same vehicle driven long highway distances in warmer weather.
Why Oil Catch Cans Must Be Drained
An oil catch can is a maintenance item. Once it separates fluid from the ventilation stream, that material remains in the reservoir until it is removed.
If the level rises high enough to reach the internal baffle or filtration system, the separator may no longer function as designed. A full can can also create airflow problems depending on the design.
How Often Should You Check a Catch Can?
There is no universal interval for every truck. Accumulation varies with engine condition, mileage, ambient temperature, trip duration, driving load and catch-can design.
Mishimoto recommends establishing an initial baseline on its application-specific kits. For example, its instructions for the 2015–2017 F-150 2.7L EcoBoost system call for checking the cans approximately every 1,000 miles during the initial monitoring period. Mishimoto also specifies an initial approximately 1,000-mile check for its 6.0L Power Stroke system. Other applications can have different recommended initial intervals.
The important point is to follow the service instructions supplied with the exact kit on your vehicle. Once you understand how quickly your engine fills the can in summer, winter, towing and everyday driving, you can establish an appropriate inspection routine without allowing the reservoir to become overfilled.
- Inspect more frequently immediately after installation
- Establish how quickly your specific engine fills the can
- Check more often during extreme cold
- Check after sustained towing or unusually heavy use
- Never allow collected fluid to rise above the manufacturer's maximum level
- Inspect hoses, clamps and fittings during service
- Clean serviceable filters and baffles as directed by the manufacturer
- Dispose of captured fluids according to local waste-oil regulations
Do All Trucks Need an Oil Catch Can?
No. An oil catch can should not be treated as a mandatory modification for every truck on the road. Many completely stock vehicles operate for very high mileage using their original crankcase ventilation systems.
A catch can makes the most sense when an owner has a specific objective: reducing oil entering an intake, minimizing contamination in a direct-injected turbo engine, adding separation to a diesel CCV circuit, or protecting a performance-oriented build from unnecessary oil vapour.
Whether the modification is worthwhile depends on the engine, how the vehicle is used, the design of the factory ventilation system and the owner's willingness to maintain the catch can.
Will a Catch Can Add Horsepower?
An oil catch can should not be purchased as a conventional bolt-on horsepower modification. It does not force additional air into the engine, increase boost or alter ignition timing.
Its purpose is contamination control. By reducing the quantity of oil vapour entering a monitored intake circuit, the goal is to help keep the intake tract cleaner over time and reduce one potential source of unwanted deposits.
Claims that every catch can immediately produces a measurable horsepower increase should therefore be treated cautiously.
Can a Catch Can Prevent Carbon Buildup?
A catch can can help reduce one source of intake contamination, but it should not be marketed as a guaranteed way to prevent all carbon buildup.
Gasoline direct-injection intake deposits are influenced by multiple factors. Oil entering through the crankcase ventilation system can contribute, but valve temperatures, operating conditions, combustion-gas backflow, engine design and other mechanisms also influence deposit formation.
Think of a catch can as a reduction strategy: intercept as much undesirable oil-containing crankcase vapour as practical before it reaches the intake while maintaining proper crankcase ventilation.
Featured Oil Catch Can Kits at Off-Road Canada
2015–2017 Ford F-150 2.7L EcoBoost
A dual-can Mishimoto system designed to capture blow-by from both PCV and CCV circuits while accommodating the factory CCV pressure sensor.
Shop F-150 Catch CanJeep Wrangler JL 2.0L Turbo
A direct-fit baffled system with a 7.5 oz reservoir, high-flow filtration and application-specific mounting and plumbing.
Shop Jeep JL Catch Can2003–2007 Ford 6.0L Power Stroke
A larger high-flow baffled separator designed for the crankcase-flow demands of the 6.0L turbo-diesel platform.
Shop 6.0L Power Stroke Catch CanShop Oil Catch Cans in Canada
Whether you're building an EcoBoost F-150, turbocharged Jeep, diesel Super Duty or another performance truck, the correct crankcase-ventilation solution depends on the engine and application. Shop vehicle-specific options and always verify model-year and engine fitment before ordering.
Shop All Oil Catch Cans Shop Engine ComponentsOil Catch Can FAQ
What does an oil catch can do?
An oil catch can separates oil droplets and other condensable material from crankcase vapour before that vapour returns to the intake through the PCV or CCV system.
What is engine blow-by?
Blow-by is combustion gas that escapes past the piston rings into the crankcase. Some blow-by is normal, but excessive blow-by can also indicate engine wear or another mechanical problem.
Why are catch cans popular on direct-injection engines?
In a gasoline direct-injection engine, fuel is injected directly into the cylinder instead of across the back of the intake valve. This means the valve does not receive the same fuel-washing effect as it does in a port-injected engine. Reducing oil vapour entering the intake can therefore be useful as part of an intake-deposit reduction strategy.
Do EcoBoost engines need a catch can?
A catch can is not mandatory for every EcoBoost engine, but owners who want to reduce oil carried through the crankcase ventilation system may choose an application-specific kit. Certain EcoBoost applications require more complex routing than a basic universal catch can.
Is a baffled catch can better?
A properly engineered baffled can generally provides more opportunity for suspended oil droplets to separate from the airflow than a simple empty container. Flow capacity and internal restriction are also important.
What is the difference between PCV and CCV?
PCV generally refers to Positive Crankcase Ventilation, while CCV commonly refers to Closed Crankcase Ventilation. Exact terminology and routing vary by engine and manufacturer, but both deal with controlling and routing crankcase vapours.
Do diesel trucks use catch cans?
Yes. Diesel engines also create blow-by and can move oil aerosol through their crankcase ventilation systems. Diesel applications may require larger, higher-flow separators to avoid restricting crankcase ventilation.
Do Ram Hemi engines benefit from catch cans?
Hemi engines still produce crankcase blow-by and can move oil mist through the PCV system. A properly designed catch can can reduce that oil contamination, although traditional 5.7L Hemi applications should not be described as having the same pure direct-injection intake-valve issue as a GDI engine.
How often should an oil catch can be emptied?
Follow the manufacturer's instructions for the exact kit. Check it frequently after installation until you establish how quickly fluid accumulates on your vehicle. Temperature, climate, engine condition and driving style can all change the required service interval.
Do catch cans need more maintenance during Canadian winters?
They can. Catch cans may collect significant water condensation in cold weather. Inspecting and draining the system more frequently helps prevent the reservoir from overfilling or accumulated moisture from freezing.
The Bottom Line
Every internal-combustion engine produces some blow-by. The factory PCV or CCV system has to move those gases out of the crankcase, and some oil mist can travel with them. A properly engineered catch can adds an additional separation stage before that vapour reaches the intake.
The modification can be particularly attractive on turbocharged trucks, gasoline direct-injection engines and high-flow diesel applications, but the quality of the system matters. Internal baffling, flow capacity, hose routing, pressure sensors, check valves and correct application-specific engineering can be more important than simply having a metal container under the hood.
Just as importantly, a catch can must be maintained. Canadian owners should pay close attention to moisture accumulation during cold weather and follow the manufacturer's recommended inspection, draining and cleaning procedures.
Ready to explore your options? Browse oil catch cans in Canada or shop additional engine components at Off-Road.ca.
